This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.
Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.
For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.
Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.
The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.

Compact, powerful and easy to use – a column PA remains the perfect companion for DJs and smaller bands. The LD Systems MAUI series represents this all-in-one concept in every detail and offers an unrivalled PA package in terms of sound, design, technology and handling. Set it up, plug it in, and you’re all set!
The MAUI 28 G3 delivers a huge, powerful and precise sound featuring 1,030 W RMS power (2,060 W peak), suitable for all applications: as a main PA for concerts, a sound system for mobile DJs or a public address system at weddings, corporate events and many more.
With its sleek and elegant design, the MAUI 28 G3 looks very appealing. The two aluminium column elements sit at the front edge of the subwoofer, further enhancing the seamless visual impression. The columns are equipped with 12 x 3.5” midrange drivers and 2 x 1” tweeters, providing an even sound distribution with constant horizontal dispersion in combination with the innovative phase plug design. In addition, the BEM-optimised waveguide ahead of the tweeters carries the high frequencies even to the very rear audience areas.
The LD Systems engineers also took great care of the crossover filter between midrange and tweeter speakers. The aim was to reduce harmonic distortion and interference to make the sound even more transparent, vibrant and powerful. The result speaks for itself: a highly precise reproduction of vocals and instruments across the entire 120° x 30° dispersion field. The columns of the MAUI 28 G3 are designed as cardioid speakers. This allows for controlled low-mids at the front and up to 18 dB of attenuation at the rear, resulting in a clean stage sound.
Equipped with a single 12” woofer and four bass reflex ports, the MAUI 28 G3 subwoofer delivers a clear, tight and punchy low end down to 37 Hz. By using a second subwoofer, the bass response can also be increased of up to 6 dB and it can also be driven in cardioid configuration at the push of a button (cardioid preset). In addition, the ultra-durable polyurea coating of the subwoofer easily withstands even the toughest demands on the road.
The MAUI 28 G3 is a real sound machine, yet also convinces with its sophisticated features in the day-to-day life of DJs, musicians and technicians. Thanks to Bluetooth 5.0 and AAC coding, the column PA becomes even more versatile. Transport is as easy as usual, while the enhanced, hidden multi-pin connections between the elements provide increased stability during assembly. There’s nothing that can knock the MAUI off its feet so easily

Highlight Features
• 2060 W Peak-power and 127 dB max. SPL
• Powerful and deep bass reproduction with 12″ subwoofer
• Balanced mids thanks to 12 x 3.5″ full-range speakers
• Precise and silky highs with 2 x 1″ high-frequency drivers
• Cardioid column for controlled low-mid and midrange sound dispersion
• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
• Optimised bass-reflex design improves bass response and reduces air flow noise
• Can be combined with an additional MAUI® 28 G3 subwoofer for increased low end or for cardioid subwoofer setups
• New Dynx® DSP (Gen.2) for distortion-free sound even at maximum volume
• AAC coding for HD Bluetooth® 5.0 streaming
• Automatic setup detection for quick and easy operation
• Fast and simple assembly without stands or cables
• Rugged birch plywood subwoofer housing with durable polyurea-coating
• Lightweight, powder-coated aluminium column housing

Specification
General
Product type PA Complete Systems
Type Powered
Color Black
Max. SPL (Peak) 127 dB
Frequency response (-10dB) 37 Hz – 20000 Hz
Dispersion (H x V) 120° x 30 °
Total Height 2052 mm
Weight 35,4 kg
Features Bluetooth Audio Streaming, Cardioid column, DSP-based Signal Processing, Excellent Sound Dispersion, Mono/ Stereo Application
Subwoofer
Woofer dimensions 12 “
Woofer dimensions (mm) 305 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 3 “
Woofer voice coil (mm) 76.2 mm
Cabinet construction Bass Reflex
Housing material 15 mm Birch Plywood
Cabinet surface Polyurea
Dimensions Subwoofer (W x H x D) 370 x 527 x 472 mm
Subwoofer weight 22.8 kg
Mid/Hi System
Midrange dimensions 12 x 3,5 “
Midrange dimensions (mm) 12 x 89 mm
Midrange magnet Ferrite
Midrange brand Custom-made
Midrange voice coil 0.75 “
Midrange voice coil 19 mm
Tweeter dimensions 2 x 1 “
Tweeter dimensions (mm) 2 x 25.4 mm
Tweeter magnet Neodymium
Tweeter brand Custom-made
Tweeter voice coil 1 “
Tweeter voice coil (mm) 25.4 mm
Wave Guide CD Waveguide
Loudspeaker inputs 1
Speaker input connections Custom-made multipin
Cabinet construction mid/high Passive Cardioid
Mid/Hi system cabinet material Aluminium
Mid/Hi system cabinet surface Powder-coated
Mid/Hi system width 103 mm
Mid/Hi system height 1540 mm
Mid/Hi system depth 135 mm
Mid/Hi system weight 12.6 kg
Amplifier module (integrated in subwoofer)
Amplifier Class D
System output (RMS) 1030 W
System output (Peak) 2060 W
Protection circuits DC protection, Multiband limiter, short circuit, thermal protection
Cooling Convection
Controls Bluetooth HOLD TO LINK button, Cardioid On/Off, Main level, Power On/Off, Sub level
Indicators Bluetooth, Cardioid On/Off, Follower mode, Limit, Power, Protect (protection circuit engaged), Signal, Subwoofer Mode
Mains connector IEC power cable (included)
Operating voltage 100 V AC – 120 V AC, 50 – 60 Hz, 220 V AC – 240 V AC, 50-60 Hz
Fuse T 5AL / 250 V
Power consumption 400 W
Ambient temperature (operating) 0 – 40 °C
Relative Humidity < 80% (non-condensing)
Line Inputs 2
Line Input Connectors Combo XLR / TRS
Line Outputs 1 x Sub OUT, 2 x THRU
Line Output Connectors XLR male
Number of speaker outputs 1
Loudspeaker Output Connectors Custom-made multipin
Bluetooth Standard A2DP
Bluetooth Audio Decoder AAC, SBC

Highlight Features
• 1460 W Peak-power and 125 dB max. SPL
• Powerful bass reproduction with 2 x 8″ subwoofer
• Balanced mids thanks to 6 x 3.5″ full-range speakers
• Precise and silky highs with 2 x 1″ high-frequency drivers
• Cardioid column for controlled low-mid and midrange sound dispersion
• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion
• Optimised bass-reflex design improves bass response and reduces air flow noise
• Can be combined with an additional MAUI® 11 G3 subwoofer for increased low end or for cardioid subwoofer setups
• Dynx® DSP (Gen.2) for distortion-free sound even at maximum volume
• AAC coding for HD Bluetooth® 5.0 streaming
• Automatic setup detection for quick and easy operation
• Fast and simple assembly without stands or cables
• Rugged birch plywood subwoofer housing with durable polyurea-coating
• Lightweight, powder-coated aluminium column housing

Specification
General
Product type PA Complete Systems
Type Powered
Color Black
Max. SPL (Peak) 125 dB
Frequency response (-10dB) 39 Hz – 20000 Hz
Dispersion (H x V) 120° x 30 °
Total Height 2052 mm
Weight 30,7 kg
Features Bluetooth Audio Streaming, Cardioid column, DSP-based Signal Processing, Excellent Sound Dispersion, Mono/ Stereo Application
Subwoofer
Woofer dimensions 2 x 8 “
Woofer dimensions (mm) 2 x 203 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2 “
Woofer voice coil (mm) 50.8 mm
Cabinet construction Bass Reflex
Housing material 15 mm Birch Plywood
Cabinet surface Polyurea
Dimensions Subwoofer (W x H x D) 305 x 607 x 403 mm
Subwoofer weight 20.5 kg
Mid/Hi System
Midrange dimensions 6 x 3.5 “
Midrange dimensions (mm) 6 x 89 mm
Midrange magnet Ferrite
Midrange brand Custom-made
Midrange voice coil 0.75 “
Midrange voice coil 19 mm
Tweeter dimensions 2 x 1 “
Tweeter dimensions (mm) 2 x 25.4 mm
Tweeter magnet Neodymium
Tweeter brand Custom-made
Tweeter voice coil 1 “
Tweeter voice coil (mm) 25.4 mm
Wave Guide CD Waveguide
Loudspeaker inputs 1
Speaker input connections Custom-made multipin
Cabinet construction mid/high Passive Cardioid
Mid/Hi system cabinet material Aluminium
Mid/Hi system cabinet surface Powder-coated
Mid/Hi system width 103 mm
Mid/Hi system height 1460 mm
Mid/Hi system depth 135 mm
Mid/Hi system weight 10.2 kg
Amplifier module (integrated in subwoofer)
Amplifier Class D
System output (RMS) 730 W
System output (Peak) 1460 W
Protection circuits DC protection, Multiband limiter, short circuit, thermal protection
Cooling Convection
Controls Bluetooth HOLD TO LINK button, Cardioid On/Off, Main level, Power On/Off, Sub level
Indicators Bluetooth, Cardioid On/Off, Follower mode, Limit, Power, Protect (protection circuit engaged), Signal, Subwoofer Mode
Mains connector IEC power cable (included)
Operating voltage 100 V AC – 120 V AC, 50 – 60 Hz, 220 V AC – 240 V AC, 50-60 Hz
Fuse T 3.15AL / 250 V
Power consumption 300 W
Ambient temperature (operating) 0 – 40 °C
Relative Humidity < 80% (non-condensing)
Line Inputs 2
Line Input Connectors Combo XLR / TRS
Line Outputs 1 x Sub OUT, 2 x THRU
Line Output Connectors XLR male
Number of speaker outputs 1
Loudspeaker Output Connectors Custom-made multipin
Bluetooth Standard A2DP
Bluetooth Audio Decoder AAC, SBC

Spesifikasi :

2 way pasif & BI Amp Sistem
Program Power : LF 1800W / HF 360W
D Power : LF 900W / HF 180W
LF 2. 12 inch Ferrite Magenet
HF 2. 1.7 Inch Neodyum
Impedance : LF 16 Ohm / HF 16 Ohm
Max SPL : 135 dB
Freq Response : 39 HZ – 20 Khz
Directivity : H90 x V10
Packing size : 58,8 x 44,7 x 100 cm /pcs
Product size : 38 x 52 x 93 cm/pcs

Garansi Ashley 1 Tahun

spesifikasi :

LF rated power 800w RMS
LF progam power 1200w
HF rated power 120w RMS
HF progam power 240w
Components LF2x10"Neo-HF2x1.7"Neo
MAX SPL ( 1m )132dB
Impedence LF2X8 Ohm/HF 16 Ohm
Frequency range 60Hz-20KHz
Enclosure geometry 0-12′
Horizontal coverange 90′
Packing Size 54 x 39 x 96,5cm

GARANSI RESMI ORIGINAL

Spesifications :

LF RATED POWER 500Watt RMS
LF program Power 1000watt
HF RATED POWER 120w RMS
HF PROGRAM POWER 240watt
Component LF2X12 HF2x1,7 NEO
MAX SPL 1M 132db
Impadance LF2x8 ohm /HF 16ohm
Freguency range 60hz -20 khz

Garansi resmi Ashley

Harga untuk 1 unit
Barang Original Ashley

Model: CLA-4
Product type: Passive Colum
Speaker Drivers: L/HF 4*4 inch
Max Power: 120Watt – 240Watt
Input Voltage: 70V/100V
Impedance: 8 ohm
Frequency Response: 50Hz – 17kHz
Max SPL (1w/1m): 104dB
Sensitivity: 92dB-+3dB
Material Box: Aluminium
Net Weight: 7.38kg/pcs
Gross Weight: 8.40kg/pcs
Product Size: 12.5*14*52.5cm/pcs
Packing Size: 19*20*63cm/pcs

Product type: Passive Colum
Speaker Drivers: L/HF 24 inch
Max Power: 60Watt – 120Watt
Input Voltage: 70V/100V
Impedance: 4 ohm
Frequency Response: 50Hz – 17kHz
Max SPL (1w/1m): 102dB 40
Sensitivity: 94dB-+3dB 100V
Material Box: Aluminum
Net Weight: 4.14kg/pcs
Gross Weight: 4.97kg/pcs
Product Size: 12.5*14*29cm/pcs
Packing Size: 19*20*39cm/pcs

Yamaha VXL1-24 Specifications:
• Speaker Type: Full-range, bass reflex
• Components: Twenty-four 1.5” cone, neodymium magnet drivers
• Frequency Range: 77Hz-20kHz
• Power Rating: 110W noise, 120W program, 440W peak
• Max. SPL: 117dB
• Nominal Impedance: 8 Ohms
• Coverage Area: 170° horizontal, 20° (NORMAL) to 40° (WIDE) vertical
• I/O Connectors: Euroblock
• IP Rating: Dust and water resistant IP35
• Dimensions: 2.1” x 47.7” x 4.1” (54mm x 1212mm x 104mm) (speaker only)
• Weight: 12.1 lbs. (5.5 kg) (speaker only)