Bass Amplifiers – PT. Sinceremusic

Roland CB-60XL Bass Guitar Ampli

shinta_devi — Wed, 09 Dec 2020 12:23:39 +0000

Roland Cube 60XL Bass Combo Amplifier
Specifications
• Compact 60-watt bass amp with custom-designed 10-inch coaxial speaker
• Dual custom-designed Air Flow Port for deep bass and punchy sound
• Eight COSM amp models, including the new SUPER LOW amp
• Seven effects, including the new DRIVE and POLY OCTAVE
• SOLO function with memory for use as a second channel
• POWER SQUEEZER for big, rich sound at low volumes
• Phrase Looper onboard for sound-on-sound recording with unlimited overdubs
• Three-band EQ for fine-tuning your sound
• Built-in chromatic bass tuner with drop tuning support
• Rated Power Output: 60 W
• BASS INPUT: -10 dBu/1 M ohm AUX IN: -10 dBu
Speaker: 25 cm (10 inches) + Tweeter (Coaxial, 2-way)
Controls: POWER Switch, TUNER Switch, POWER SQUEEZER Switch [COMP/DRIVE] COMP/DRIVE Knob (COMP, DRIVE) [COSM AMPLIFIER] TYPE Switch (SUPER FLAT, FLIP TOP, B MAN, T.E, BASS360, SESSION, CONCERT 810, SUPER LOW) SHAPE Switch GAIN Knob VOLUME Knob [SOLO] ON/OFF, MEMORY Switch VOLUME Knob [EQUALIZER] BASS Knob MIDDLE Knob TREBLE Knob [EFX] EFX Knob (CHORUS, POLY OCTAVE) [REVERB] REVERB Knob (ROOM, PLATE) [DELAY/LOOPER] REC/PLAY/DUB Switch TAP/STOP Switch DELAY/LOOPER Knob (DELAY, LOOPER) [DI OUT] GND LIFT Switch (OFF, ON)
• Indicators: Power COMP/DRIVE TUNER SHAPE SOLO EFX DELAY/LOOPER REC/PLAY/DUB REVERB POWER SQUEEZER
• Connectors: BASS INPUT Jack (1/4" phone type) AUX IN Jack (Stereo miniature phone type) LINE OUT Jack (1/4" phone type) DI OUT Jack (XLR type) RECORDING OUT/PHONES Jack (Stereo 1/4" phone type) FOOT SW Jack (TIP:SOLO, RING:COMP/DRIVE) (1/4" TRS phone type) FOOT SW Jack (TIP:EFX, RING:REVERB) (1/4" TRS phone type) FOOT SW Jack (TIP:DELAY/REC/PLAY/DUB, RING:TAP/STOP) (1/4" TRS phone type)
• Power Consumption: 25 W
• Accessory: Owner’s Manual
• Size: Width 421 mm 16-10/16 inches, Depth 325 mm 12-13/16 inches, Height 479 mm 18-7/8 inches
• Weight: 16.2 kg 35 lbs. 12 oz.

Roland CB-20XL Bass Guitar Ampli

shinta_devi — Wed, 09 Dec 2020 12:23:39 +0000

Roland CUBE-20XL BASS Combo Bass Amplifier Features at a Glance:
• 20-watt power output
• 1 x 8" speaker
• Power squeezer switch maintains tone while dropping output volume
• 6 COSM bass amp models including SUPER FLAT, FLIP TOP, B MAN, BASS360, SESSION, and CONCERT 810
• 7 effects including chorus, poly octave, delay, and reverb types
• Single-knob compression and drive and 3-band EQ for added tone control
• Onboard tuner
• Solo mode with memory recall
• 1 x 1/4" bass input jack, 1 x 1/8" stereo aux input jack, and 1 x 1/4" TRS footswitch input jack for controlling EFX/solo functions (compatible with BOSS FS-5U and FS-6 footswitches)
• 1 x 1/4" headphones/recording output

Tech Specs
• Type:Solid State
• Number of Channels:1
• Total Power:20W
• Speakers:1 x 8"
• Effects:Yes
• Compression:Yes
• EQ:3-band
• Amp Modeling:Yes
• Number of Models:6
• Inputs:1 x 1/4", 1 x 1/8" (aux)
• Outputs:1 x 1/4" (recording out/headphones)
• Footswitch I/O:1 x 1/4"
• Footswitch Included:No
• Power Source:Fixed AC cable
• Height:13.19"
• Width:13.19"
• Depth:12.88"
• Weight:20.72 lbs.
• Manufacturer Part Number:CB-20XL

Cort CM150B Bass Amplifier

shinta_devi — Fri, 20 Nov 2020 16:45:12 +0000

Combo Amplifier for Electric Bass
• Power: 150 W RMS
• Equipped with: 12" Speaker
• 4-Band equaliser with 2 mids controls
• Bright switch for treble emphasis
• Mode switch for saturation
• Effect path
• XLR line output
• AUX input
• Dimensions (H x W x D): 44 x 44 x 36 cm
• Weight: 16 kg
• Colour: Black

Cort GE30B Bass Amplifier

shinta_devi — Fri, 20 Nov 2020 16:45:11 +0000

Built-in Compressor Tilt-back Construction Active/Passiv Inputs Metal Grill 5-band Equalizer Effect Loop SPECIFICATIONS Input Voltage: ~100V, ~110V, ~120V, ~220V, ~230V, ~240V 50/60Hz (Factory option) Power Requirements: 65W Power Outage: 30W R.M.S. Rated Load Impedance: 6 Ohm Speaker: Custom 10" Dimensions: 417x450x265 Weight: 10.6

AMPLIFIER
Built-in Compressor
Tilt-back Construction
Active/Passiv Inputs
Metal Grill
5-band Equalizer
Effect Loop

SPECIFICATIONS
• Input Voltage: ~100V, ~110V, ~120V, ~220V, ~230V, ~240V 50/60Hz (Factory option)
• Power Requirements: 65W
• Power Outage: 30W R.M.S.
• Rated Load Impedance: 6 Ohm
• Speaker: Custom 10"
• Dimensions: 417x450x265
• Weight: 10.6

Cort GE15B Bass Amplifier

shinta_devi — Fri, 20 Nov 2020 16:45:11 +0000

ACTIVE/PASSIVE INPUTS
GE series equipped with both "Active" and "Passive" inputs, which help users to find the right tone depending on their choice of bass guitars. Hint: When your bass have very hot signal, try Active input.

BUILT-IN COMPRESSOR
GE series is equipped with built – in compressor.

3-BAND EQUALIZER
The 3-band equalizer features carefully selected frequency bands that are ideal to bring the natural character of your bass guitar while providing a wide range of sounds and tonal character.

TILT-BACK CONSTRUCTION
The GE15B’s tilt-back cabinet design has two angles for the most optimum sound projection depending on the playing situation. The straight angle is typically used for projecting to an audience while tilt-back is for monitoring the performer’s sound.

SPECIFICATIONS
• INPUT VOLTAGE: ~100V, ~110V, ~120V, ~220V, ~230V, ~240V 50/60HZ (Factory option)
• POWER REQUIREMENTS: 35W
• POWER OUTAGE: 15W R.M.S
• RATED LOAD IMPEDANCE: 8 Ohm
• SPEAKER: Custom 8″